Use SCROLL button to select Vehicle Info. from
Diagnostic Menu and press ENTER/EXIT button.
1. Wait a few seconds or press ENTER/EXIT
button to continue.
If the vehicle does not support this mode,
"The selected mode is not supported!" message
shows on the display. If more than one module
is detected, you will be prompted to select a
module before test.
Use SCROLL button to select and press ENTER/EXIT button.
2. Wait a few seconds to read vehicle information.
3. From Vehicle Info. menu, use SCROLL button
to select an available item to view and press
ENTER/EXIT button.
To Next Page
Loading...