PRODUCT SUPPORT & INFORMATION
• Hole Saw - Ø65mm ~ Ø70mm (2
5
/8” ~ 2
3
/4”saw)
• Box cutter / knife
• No. 2 Phillips screwdriver
• Flat-blade screw driver (for light-head removal)
IMPORTANT NOTES
• The use of power tools for product assembly is NOT recommended as these
devices can cause faults and damage to light components.
• The enclosed images are for illustrative purposes only. Appearances of parts
and assemblies may vary from the enclosed illustrations.
• Please contact your reseller if you have any questions regarding the correct
installation of this product.
Phone: +61 (0)3 9793 2299 (business hours)
Email: info@spaelectrics.com.au (SALES enquiries)
Email: tech@spaelectrics.com.au (TECHNICAL support enquiries)
Web: www.spaelectrics.com.au
4
TOOLS REQUIRED
To Next Page
Loading...
