Spa Electrics Atom - INSTALLATION PROCEDURE; MOUNTING HOLE PREPARATION; ORIENTATION OF NICHE TOP

* MAY NOT BE REQUIRED IF PRE-PUNCHED / DRILLED HOLES AVAILABLE FOR LIGHT MOUNTING
Ø65~Ø70mm
(2
5
/8” ~ 2
3
/4”)
HOLESAW
DRILL HOLE THROUGH STEEL WALL
ESTIMATED WATERLINE
470mm (MAX)
120mm (MIN)
BELOW ESTIMATED
WATERLINE
FEED CABLE
THROUGH
HOLE
7
INSTALLATION PROCEDURE
2
ORIENTATION OF NICHE “TOP”
1
MOUNTING HOLE PREPARATION *