16 | CLARO
CARE AND MAINTENANCE
Cleaning: The CLARO is intended for surface contact with skin
and does not require sterilization.
Follow the steps below to clean the treatment head surface after each
use:
1. Unplug the USB Cord from the CLARO.
2. Gently rub the treatment head surface using a soft, lint-
free cloth that has been moistened with water and a mild,
alcohol-free cleaner such as dishwashing liquid. Remove the
cleaner by rubbing with a soft, lint-free cloth moistened by
water only. Your device is not waterproof. DO NOT submerge
the device in water, put the device in the dishwasher or
otherwise allow water to enter the device. Should the unit
accidentally become submerged, do not attempt to use it.
Contact Spa Sciences Customer Service.
Storage: When not in use for prolonged periods, store your CLARO in a
dry place at a temperature between 32°F and 140°F (0°C to 60°C).
The CLARO does not require any other regular maintenance. If the Device
is not working properly, discontinue use and contact Customer Service at
customerservice@spasciences.com.
To Next Page
Loading...
