Spa Sciences CLARO - CLARO power turns off on its own; CLARO light turns off on their own after 3 minutes; CLARO lights turn on when Treatment Head is not in contact with skin; Treatment Head temperature rises during treatment

18 | CLARO
PROBLEM
CLARO power turns o on its own
CLARO light turns o on their
own after 3 minutes
CLARO lights turn on when
Treatment Head is not in contact
with skin
DO NOT look directly into
lights. Press ON/OFF button
immediately to turn device o
and contact Customer Service.
• Press the ON/OFF button
to reactivate power and put
Device in Standby mode..
• If the device turns o
before 3 minutes, make
sure the battery is charged.
If the battery does not
need charging, wait 5 to
10 minutes for the device
to cool and try turning the
device back on.
• Device is working properly
if the lights go o after 3
minutes of use (in contact
with skin). Press Treatment
Head to another location
on your skin to re- activate
lights for another 3 minutes.
• If the lights turn o before
3 minutes, make sure the
Treatment Head face is in
contact with skin (pressing
gently).
TRY THIS SOLUTIONS
Treatment Head temperature
rises during treatment
It is normal for the Treatment
Head to get warm during
treatment. If the Treatment Head
gets hot too the touch, turn the
device o and contact Customer
Service.