1. Familiarize yourself with the
"Operation Instructions" booklet.
2. Ask questions, if you are unsure of
any operational or safety features.
3. Bring any unusual performance of
the system to the attention of your
supervisor.
4. Treat this system as you would any
piece of precision equipment.
5. Follow the recommended shelf
loading instructions found in the
"Operation Instructions" booklet.
6. Keep media neatly stored and
pushed fully back onto the
shelving.
7. Provide needed preventative
maintenance according to the
recommended schedule. Ask
about a preventative maintenance
contract.
8. Make certain that all system safety
devices are operational.
9. Call your local Spacesaver repre-
sentative immediately, if a safety
device requires attention.
1. Climbing on the shelving.
(Use a stool.)
2. Jumping onto the floor from step
stools, ladders, etc.
3. Leaving items in the aisles.
4. Operating the system without
checking the open aisle(s) for
people and/or objects.
5. Allowing media to extend into the
aisle to the extent that the car-
riages cannot nestle together
properly.
6. Leaving reference shelves extend-
ing into the aisle.
7. Overloading your system. Stay
within recommended weight and
distribution limits.
8. Operating any system under the
safety override condition except in
the presence of your supervisor.
REV. 2.0/OP-9145 SSC/ECONO 5/00
IMPROPER USEPROPER USE
PROPER USE/IMPROPER USE
To Next Page
Loading...
Need help?
General
