SPALDING E6A994 - Page 20

Attach spacers (20, 21) to pole mount bracket (15) with
bolts (19), washers (17), and nuts (11) as shown.
Install pole mount bracket (15) and reinforcement bracket (42) with carriage bolts (16) to top pole
(4) as shown. Tighten flange nuts (14) completely.
4
42
16
16
15
14
14
20
9.
10.
15
17
17
11
19
17
17
21
20
20
21
IMPORTANT!
Tighten just until washers
(17) stop moving.
IMPORTANT!
DO NOT OVER TIGHTEN.
TOP POLE
4