Sparx Skate Sharpener - WARRANTY; LIMITED ONE-YEAR PRODUCT WARRANTY; HOW TO MAKE A WARRANTY CLAIM; EXCLUSIONS

To Next Page

To Previous Page

TROUBLESHOOTING 23

ERROR TyPES

There are two types of errors encountered by the Sparx™ Sharpener that can interrupt

operation. These types are: Function Entry errors and System Stop errors. Each error type is

described in the table below along with information about how the user is informed of the error.

TROUBLESHOOTING

ERROR TYPE DESCRIPTION DISPLAY METHOD

I: Function Entry

Errors that prevent the user

from entering into a function

(e.g. sharpening or alignment).

• Displayed through the user interface

(e.g. ﬂashing lights at the area of concern,

such as the Protective Slot Cover lig hts).

• Temporarily displayed on the Cycle

Counter.

• Not saved to Error History.

II: System Stop

Errors that cause the sharpener

to exit out of a function

because of safety concerns or

to prevent sharpener damage.

• Displayed on the Cycle Counter.

• All functionality is disabled until the user

acknowledges the error by pressing the

Cancel Button.

• Saved to Error History.