OPERATION 15
4
OPERATION
LOADING A SKATE
*For loading goalie skates and youth skates,
see the end of this section.
To watch the How-To video, visit sparxhockey.com/loadskate.
1 LOAD THE SKATE
Press and hold down the Clamp Lever to open the Skate Clamp.
With the skate toe pointing left and the laces tucked into the
skate, set the skate into the Skate Clamp slot letting the plastic
blade holder rest on top of the clamps. Center the skate blade
in the Skate Clamps. Release the Clamp Lever.
2 CLOSE THE PROTECTIVE SLOT COVERS
Move each Protective Slot Cover (A) in toward the
skate until they touch the blade holder and the Safety
Lights (B) extinguish.
B B
A
To Next Page
Loading...