SPC STELLA 2 - Remote Configuration via SMS

15
This feature allows you to give permission to up to 5 numbers to remotely control your
phone via SMS from another phone.
For this you need to:
- Enable the remote configuration feature, under Settings > Smart Help > Remote
Configuration > Status > Enabled,
- Add to the list of *numbers the contacts you want to give permission to configure
your phone remotely (maximum 5) under "Settings > Smart Help > Remote
configuration > Allowed numbers".
*You must specify the area code (+34 for Spanish mobile numbers), for example
+34611222333.
These are the 3 STELLA 2 functions that can be configured from another phone via SMS.
1. ACTIVATE AND CONFIGURE SOS FUNCTION
By sending an SMS to STELLA 2 from one of the allowed numbers with the following codes:
- To activate/deactivate the SOS function:
ACTION SMS CODE
Activate the SOS function *SOS#1#.
Deactivate the SOS function *SOS#0#.
- To set phone numbers in the SOS list:
ACTION
SMS CODE
Configure the number 611 111 111 as the 1st in the SOS list
*SOS#2#1#611111111
Configure the number 622 222 222 as the 2nd in the SOS list
*SOS#2#2#622222222
Configure the number 633 333 333 as the 3rd in the SOS list
*SOS#2#3#633333333
Configure the number 644 444 444 as the 4th in the SOS list
*SOS#2#4#644444444
Configure the number 655 555 555 as the 5th in the SOS list
*SOS#2#5#655555555
- To delete numbers from the SOS list:
ACTION
SMS CODE
Remove number 1 from SOS list
*SOS#3#1#
Remove number 2 from SOS list
*SOS#3#2#
Remove number 3 from SOS list
*SOS#3#3#
Remove number 4 from SOS list
*SOS#3#4#
Remove number 5 from SOS list
*SOS#3#5#