19
FRAME SPECIFICATIONS
ITEM SPECIFICATION
HEADSET 1 1/8” UPPER / 1.5” LOWER
SEAT COLLAR DIAMETER 34.9MM
SEATPOST DIAMETER 30.9MM
DERAILLEUR HANGER S162600002
REAR HUB (6FATTIE, HARDTAIL) 148MM X 12MM
REAR HUB (FAT) 197MM X 12MM
FRONT HUB (6FATTIE, HARDTAIL) 110MM X 15MM
FRONT HUB (FAT) 150MM X 15MM
RECOMMENDED TIRE PRESSURES
Proper tire pressure is critical for optimal performance. Tires with higher pressure will typically roll faster and provide
less rolling resistance, but provide less traction. Tires with lower pressure will typically provide increased traction
and control at the expense of rolling resistance. Too little pressure will increase the risk of rim damage and potential
for “burped” tires (releasing air when used as tubeless).
Experiment with different tire pressures in different conditions to find what works best for you when riding your
preferred terrain.
With the increased volume of 6Fattie tires it is much more difficult to determine pressure by squeezing the tire. Use a
quality pressure gauge instead and refer to the tire pressure recommendations written on the side of the tires.
Because of the extra weight of the Levo bicycle, tire pressure should generally be higher compared to a
regular bicycle with 6Fattie tires, such as a Stumpjumper or Rhyme 6Fattie FSR.
To Next Page
Loading...
