43
4-5. Setup ā DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the Cancel button.
Figure 4.5. DISPLAY Setup Screen
Table 4.5. Menu Items in DISPLAY Setup Screen
Item Description
OSD
Enable/disable on-screen-display.
OSD CONTRAST
Set the transparency level of the On Screen Display (OSD) (50~100)
MAIN MONITOR
SEQUENCE
Enable/disable sequential display of video in full screen mode.
To Next Page
Loading...
