Need help?Do you have a question about the Speco D16RS and is the answer not in the manual?
Symbols indicating important instructions and dangerous voltage warnings for safe operation.
Steps for the first boot up, including logo display and initial date/time configuration.
Configuring Daylight Saving features and Network Time Protocol synchronization.
Details the LEDs and ports on the front panel of the DVR units.
Identifies and describes the various input/output ports on the rear of the DVR.
Explains the buttons and their functions on the remote control device.
How to enter setup mode and navigate the live screen interface.
Settings related to language, date, time, NTP, and email notifications.
Configuring recording modes, resolution, frame rates, and schedules.
Options for alarm output, PTZ control, spot output, and motion detection.
Adjusting on-screen display (OSD) elements and video output settings.
Setting up IP addresses, DDNS, ports, and network streams.
Managing user accounts, passwords, and access authorities.
Configuring recording limits, overwriting, and disk formatting.
Exporting/importing settings, loading defaults, and software upgrades.
Displaying live camera feeds and understanding status icons.
Operating Pan/Tilt/Zoom and other PTZ camera functions.
Methods for searching recorded video by time, event, or log.
Navigating and controlling video playback, including speed and backup.
Archiving still images to USB flash drives or external storage.
Archiving video footage to USB flash drives or external storage.
Moving stored video or images from the archive list.
Playing back archived video files using compatible players.
Minimum and recommended specifications for running the network viewer.
Step-by-step guide for installing the multi-site monitoring software.
Navigating the live viewer interface and using control buttons.
Accessing and using the search and playback features of the viewer.
Configuring general, event, record, disk, and display settings for the client.
Remotely configuring DVR settings via the network.
Adding, deleting, modifying, and connecting to DVR sites.
Installing and using the Speco Viewer app on an iPhone.
Installing and using the Speco Viewer app on an Android phone.
To Next Page
General
