Speco D16RS - System Configuration

20
4-2. Setup – SYSTEM Mode
In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below.
Navigate through the menu items using the mouse or the remote control and change the value of the menu
item.
Figure 4.2.1. SYSTEM Setup Screen
Table 4.2.1. Menu Items in SYSTEM Setup Screen
Item
Description
DESCRIPTIO
N
Press the button to view the system information. (Software Version, Storage Size, IP
Address, MAC Address and DDNS Status)
LANGUAGE
Select the display language using the mouse or the control button on the remote control.
Once a language is selected, the display language will change.