English
17
• In the same line:
– Age: Age of the corrections received, in seconds.
– Station ID: Identification number of the station, or PRN
of satellite in SBAS, or RTX satellite ID, providing the
corrections used.
• Status: Network connection status (Connected or
Disconnected) (Blank if SBAS).
Receiver Profile Status
: Touch this icon (see [5] on page 15) to read information
about the SP20:
• Receiver Type: “SP20”.
• GNSS Connection Status: “Connected” necessarily. At
power up, as long as this connection is not active, you
cannot open this window and the receiver icon looks like
this:,
NOTE: After launching SPace, it takes about 4 seconds
before this connection is active.
• RTX Subscription: Provides the current status of your
subscription to the RTX service (available at a later date):
– Valid until <date>: You are currently allowed to use the
RTX service. The subscription will expire at the
specified date.
– Expired: Subscription expired. You need to renew your
subscription if you wish to resume using the RTX
service.
– Invalid: Your receiver has never been allowed to decode
RTX corrections. If you want your receiver to do so, you
need to subscribe to the RTX service (available at a
later date).
• MSL version: Software version of SP20 Micro Service
Layer. (This piece of software is used to interface SP20
with Android).
• RTK Option: Indicates the level of precision available from
your SP20:
– Full RTK (centimeter accuracy): Centimeter-accurate
3D position
– 7/2 (decimeter accuracy): Accuracy is 7 cm in
horizontal and 2 cm in vertical
– 30/30 (sub-meter accuracy): Accuracy is 30 cm in both
horizontal and vertical.
To Next Page
Loading...