101
DDS: Differential Decoder Status
$PASHR,DDS,d1,m2,d3,c4,s5,c6,d7,d8,d9,d10,d11,f12,f13,d14,n(d15,
f16,f17)*cc
Parameter Description Range
d1
Differential decoder number.
“1” corresponds to first decoder, etc.
An empty field means the decoder
used is not known.
1-4
m2 GNSS (output) time tag 000000.00-235959.99
d3
Number of decoded messages since
last stream change
0-127
c4
ID of port from which corrections are
received
A-E, I, P, Q, Z
s5
Protocol detected (empty means “no
data”)
RT2, RT3, CMR, ATM,
CMX
d6
Time window, in seconds:
• “0” if not defined or just initialized
• “200” means equal to or greater
than 200
0-200
d7
Percentage of estimated overall data
link quality/availability. Empty if not
defined.
0-100
d8
Percentage of deselected informa-
tion. Empty if not defined.
0-100
d9
CRC percentage. Empty if not
defined.
0-100
d10 Standard of latency, in milliseconds 0-16383
d11 Mean latency, in milliseconds 0-16383
f12 Mean epoch interval, in seconds 0.00-3600
f13 Min. epoch interval, in seconds 0.00-3600
d14
Number (n) of different messages
detected since last stream change
0-63
d15 Message type
RT2: 1-63
RT3: 1001-4094
CMR: 0(obs), 1(loc),
2(desc), 3(glo), 12(cmr+),
20 (glo encrypted)
ATM: 0-15
CMX: no message reported
f16 Interval of last message, in seconds 0.000-1023.000
f17 Age of last message, in seconds 0.000-1023.000
*cc Checksum
To Next Page
Loading...
