Spectra Precision SP90m - RCS: Recording Status

114
RCS: Recording Status
??????????????????????????
$PASHR,RCS,c1,d2,s3,d4,f5,f6,f7,d8,d9)*cc
Parameter Description Range
c1
Recording status:
• Y: Data recording in progress; receiver will keep
on recording data after a power cycle.
• N: No data recording in progress; after a power
cycle, no recording will start either.
• S: No data recording in progress, but receiver
will start recording data after a power cycle.
• R: Data recording in progress, but receiver will
stop recording data after a power cycle.
Y, N, S, R
d2
Memory where data file is recorded:
• 0: Internal memory
s3 Data filename 255 char. max.
d4 Recording rate, in seconds: 0.05-960
f5
Occupation type:
•0: Static
• 1: Quasi-static
• 2: Dynamic
0-2
d6
Occupation state:
• 0: In progress
• 1: No occupation
0-1
s7 Occupation name 255 char. max.
*cc Checksum *00-*FF