EasyManua.ls Logo

Spectra Precision SP90m Manual

Spectra Precision SP90m
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
43
Power-Off Screen Hold down the Power button for a few seconds. The Spectra
Precision logo will appear on the screen.
After a few seconds, the message “Powering off...” will follow,
indicating that the receiver is being turned off.
If the anti-theft protection is still enabled when you ask for
receiver power-off, a message will ask you to confirm your
request.
If you wish to keep using the anti-theft protection, press OK
and then the receiver will complete the power-off sequence
as described above.
If you want to remove the anti-theft protection before turning
off the receiver, press Escape, go back to Advanced Settings to
remove the anti-theft protection (see page 37). Then you can
turn off the receiver as explained above.

Table of Contents

Other manuals for Spectra Precision SP90m

Question and Answer IconNeed help?

Do you have a question about the Spectra Precision SP90m and is the answer not in the manual?

Spectra Precision SP90m Specifications

General IconGeneral
TypeGNSS Receiver
Positioning Accuracy RTK (H/V)8 mm + 1 ppm / 15 mm + 1 ppm
Internal Memory8 GB
CommunicationBluetooth, Wi-Fi, USB, Serial
Cellular4G LTE
Operating Temperature-40°C to +65°C
IP RatingIP67
Battery LifeUp to 10 hours
Frequency BandsGPS L1/L2, GLONASS L1/L2, Galileo E1/E5a/E5b, BeiDou B1/B2/B3, QZSS L1/L2/L5
Positioning Accuracy Static (H/V)3 mm + 0.5 ppm (H) / 5 mm + 0.5 ppm (V)
Data Logging RateUp to 20 Hz

Related product manuals