©2023 Spectra Precision | All Rights Reserv ed
Manual mode
Manual button
Manual mode bypasses the laser‘s automatic leveling to use the laser in slope mode in
horizontal or vertical set up.
Press and release the manual button at the laser or the remote control.
Result: the MAN LED will flash red once a second.
Horizontal: slope the laser beam using the arrow buttons at the laser or the remote
control.
Vertical: the up/down arrow buttons adjust the vertical slope. The left/right arrow buttons
can be used for the line adjustment to the left and right.
To resume the automatic self-leveling mode, press the manual button again
MAN LED
Up/down and left/right arrow buttons
To Next Page
Loading...
