Product End-of-Life Disassembly Instructions
Disassembly Instructions Form Doc # | Spectralink Europe ApS
This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of Spectralink Butterfly Handset to remove components and materials
requiring selective treatment, as defined by EU Directive 2002/96/EC Waste Electrical and Electronic
Equipment (WEEE).
Product Name : Handset / Spectralink Butterfly Handset
Items Requiring Selective Treatment
The following components should be disposed of or recovered separately from other recyclable items, in compliance
with Article 4 of EU council Directive 75/442/EEC
Enter the quantity of items below contained within the product in the right column, as applicable.
Printed Circuit Boards of Printed
Circuit assemblies
With surface greater than 10 sq cm
Ni-MH rechargeable batteries, type AAA
1.2V
Mercury Containing components
For example, mercury lamps, display
backlights, scanner lamps, switches,
batteries
Liquied Crystal Displays (LCD) with
a surface greater than 100 sq cm
Includes background illuminated displays
with gas discharge lamps
Electrolytic capacitors / condensers
Measuring greater than 2.5 cm diameter or
height
External electrical cables and cords
Plastics containing brominated
flame retardants weighing >26g
Does not include PCBs or PCSs
Components and parts containing
toner and ink
Parts and materials containing
refractory ceramic fibers
Tools required to disassemble the product where components and materials in table above can be
removed.
Tools Size (if
Applicable)