Spectrum SP-UV 200 Series User Manual

8.3 Round cell holder
This special cell holder can be used for round cell of standard test kits. Cells with a diameter up to 16 mm
and a high up to 11 cm can be used.
Fig. 9SP-UV 200 Round cell holder
8.4 Automatic cell changer
The automatic cell changer accommodates 6 cells a 10mm path length cell of 12.5 x12.5 x 45 (L x W x H in
mm).
Fig.10 Automatic 6 cell changer
To install this accessory in the sample compartment of the SP-UV 200 switch the device off, plug the
electrical connection in the internal serial port at the back site of the sample compartment. Use two screws
to install the system. Start the instrument new.
8.5 Printer
To install the printer to the SP-UV 200 switch the device off, plug the electrical connections into the USB at
the back side of the device. Start the instrument new.
User’s Manual SP-UV 200 16
Spectrum Instruments

Spectrum SP-UV 200 Series Specifications

General

Brand	Spectrum
Model	SP-UV 200 Series
Category	Measuring Instruments
Language	English