Spectrum SP-UV 200 Series User Manual

10 Software function
10.1 Function
Press[Function] to call menu.
1. Abs/%T/Conc. Absorbance/Transmittance/Concentration measurement
2. 0%T Dark Currency Correction
3. Factor/Conc. Concentration factor edit
4. Lamp Exchange Set light source switch point
5. Lamp on/off Turn off light source
6. Standard Curve Create a standard curve
7. Language Select display language.
8. Com. with PC Connect with PC
9. Set time Set the date and time
10.2 Select Language Mode
1. Press [Function]. (Press again, if necessary, to display Language menu item). The LCD will
display as blow.
2. Press [7], to select Language menu item. Press [Enter].The LCD will display as blow.
3. For Chinese press [1], for English press [2], for German press [3]
10.3 Turn the Lamps on/off
You can turn off halogen lamp or the deuterium lamp, when your methods do not need it.
1. Press [Function]. (Press again, if necessary, to display Lamp on/off menu item).The LCD will
display as blow.
5．Lamp on/off
6．Standard Curve
7．Language
8．Com. With PC
Select Language:
1．Chinese
2．English
3．German
5．Lamp on/off
6．Standard Curve
7．Language
8．Com. With PC
User’s Manual SP-UV 200 18
Spectrum Instruments

Spectrum SP-UV 200 Series Specifications

General

Brand	Spectrum
Model	SP-UV 200 Series
Category	Measuring Instruments
Language	English