To Next PageTo Next PageWhy is my Speed Queen Washer using the wrong water temperature?
If your Speed Queen Washer is using the wrong water temperature, make sure that the controls are properly set. Check the fill hoses to ensure the hot faucet hose is connected to the hot mixing valve and the cold faucet is connected to the cold mixing valve. Also, make sure your laundry room water heater is adjusted properly.
Provides crucial safety precautions for using the washer to prevent injury or damage.
Lists the sequential steps for correctly installing the washing machine.
Details on connecting the water inlet hoses to the washer and supply.
Specifies the necessary water pressure, temperature, and connection types.
Guidance on connecting the power cord, including voltage and amperage.
Steps for connecting the drain hose for non-gravity drain systems.
Steps for connecting the drain hose for gravity drain systems.
Procedures for correctly positioning and leveling the appliance for stable operation.
General instructions for connecting the washer to the electrical supply.
Critical information regarding proper grounding to prevent electric shock.
Provides solutions for common washer problems like "Won't Fill" or "Won't Drain".
A step-by-step checklist for installers to verify correct setup.
General| Brand | Speed Queen |
|---|---|
| Model | SF3JM |
| Category | Washer |
| Type | Top Load |
| Capacity | 3.2 cu. ft. |
| Color | White |
| Agitator | Yes |
| Water Temperature Settings | Hot, Warm, Cold |
| Energy Star Certified | No |
| Water Level Selection | Yes |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Cycle Options | Extra Rinse |
| Depth | 28 in |
| Height | 43 in |
| Width | 27 inches |
