FUNCTION PRT USING COMMUNICATION
CONNECTION - GROUP CONTROL
Individual Room Control 44
Individual Holiday Function 44
Individual Party Function 44
Individual Heating Program 44
Individual Frost Function 44
Group Holiday including HW 6 4
Group Party 6 4
Group Heating Program 6 4
Group Permanent Override 6 4
Group Temporary Override 6 4
Heat/Cool changeover 6 4
Note: HW timer will only use HOLIDAY mode when the communication connection
is used. Also the HW Timer must be connected to GROUP 1 communication
terminals on the Wiring Centre. Please see the Wiring Centre Instruction Manual.
Option 2 - Page 33 Option 3 - Page 35
10
JGSTAT2 Instruction Manual
System Overview - Grouping and Communication
To Next Page
Loading...