Speedfit JGSTAT2W - Installation - User Interface

ICON FUNCTION
1. Increase or decrease setpoint temperature.
2. Increase or decrease Day, Clock, Timer, Party, Holiday and Boost.
3. Select Installer Parameter value.
1. Mode selection.
2. Long press to return to home display without saving.
3. Short press to return to the previous screen when it is in
user/installer setting mode.
1. OK key: Short press to confirm selection.
2. Long press to save and exit.
3. Long press to enter the user settings.
Lock/Unlock.
Enter Installer Parameter settings.
Test mode.
Installation - User Interface
OR
+
++
LONG PRESS
LONG PRESS
LONG PRESS
+
OR
26
JGSTAT2 Instruction Manual