To Next PageTo Next PageWhy SPERONI RSM 5 Water Pump motor will not start?
If the motor of your SPERONI Water Pump won't start, begin by checking the mains voltage. If there's no voltage, that's your problem. Alternatively, the pump impeller might be jammed. In this case, carefully dismantle the hydraulic section to see if the impeller rotates freely, then reassemble it with care. Also, check if the thermostat is detached and reassemble it with care.
German declaration of conformity with EU directives for the product.
English declaration of conformity with EU directives for the product.
French declaration of conformity with EU directives for the product.
Italian declaration of conformity with EU directives for the product.
Spanish declaration of conformity with EU directives for the product.
Russian declaration of conformity with EU directives for the product.
Details pump dimensions, weight, and component measurements.
Instructions for safe operation, electrical connections, and user responsibilities.
Guidelines on acceptable liquids, usage scenarios, and potential hazards.
Information on servicing, spare parts, and manufacturer liability.
Instructions for correct installation of suction and delivery pipes.
Guidance on filling the pump, avoiding dry running, and frost protection.
Lists common problems, their causes, and recommended remedies.
General| Outlet connection | 1" |
|---|---|
| Maximum liquid temperature | 35°C |
| Body material | Cast iron |
| Power | 0.75 kW |
| Frequency | 50Hz |
| Liquid type | Clean water |
| Motor power | 0.75 kW |
| Voltage | 230V or 400V (depending on model) |
