Time Menu Option Menu
OSD Language
Select OSD Language with the / buttons then press OK to adjust the on-screen Language.
TT Language
This setting is not used in Australia & New Zealand.
Audio Languages
3UHVVźŸWRVHOHFW$XGLR/DQJXDJHDQGSUHVVOK to enter language selection menu. Adjust to
SUHIHUUHGODQJXDJHE\XVLQJWKHŻŹEXWWRQVDQGSUHVVOK to confirm. Press MENU to return to
previous menu.
3UHVVWKHźŸEXWWRQVDQGOK to select the Reset menu. Select Yes with the left arrow to reset
the TV to its factory settings which will erase all of the previous settings.
6HOHFW+HDULQJ,PSDLUHGZKHUHVXSSRUWHGZLWKźŸEXWWRQVDQGWKHQSUHVVWKHŻŹEXWWRQVWR
turn on or off.
.
Subtitle Languages
3UHVVźŸWRVHOHFW6XEWLWOH/DQJXDJHSUHVVOKWRHQWHUPHQXDQGVHOHFWODQJXDJHZLWKźŸ
RUŻŹEXWWRQV
Press OK button to confirm then press MENU button to return to the previous menu.
Hearing Impaired
PVR File System
To check the status of the USB drive, format a drive or change the maximum record/time
shift setting, select PVR File System with / buttons and then press the OK button enter.
Reset
14
15
Clock
The clock and date DUH automatically programmed from information received from DTV Channels.
You should not need to use this sub-menu once you have received a DTV signal, however this
can be manually changed if required.
Off Time
This setting allows you to set a specific time to turn the TV off. Once you enter the menu,
this function can be set to operate once only, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sunday
only.
On Time
As with the Off Time function, this setting allows you to select a time to turn the TV on.
In addition to the day settings, you can also select the source you woul
d like selected when
the TV turns on and your desired volume level.
Sleep Timer
Select Sleep Timer with thHź/ŸEuttons and press the button to set the sleep timer
to automatically turn the TV off in 10/20/30/60/90/120/180 or 240 minutes.
Auto Standby
Select Auto Standby with thHź/ŸEuttons. Then with the buttons, select 3,4 or 5 hours. ŻŹ
The TV will turn off if there is no activity using the remote or buttons onthe TV for this period
of time.
Time Zone
You should not need to use this sub-menu once you have received a DTV signal, however
this can be manually changed if required.
OSD Timer
The OSD Timer sets the amount of time the on-screen menus are displayed on the TV. Thedefault
time is 15sbut should you wish to change this, select OSD Timer with the buttons. Then with the
Ż Źbuttons, select Always (on) or 5, 10, 15, 20, 25, 30 seconds.
Daylight Saving
Select Daylight Saving by using the / buttons and adjust daylight saving time on or off with
the ŻŹ
buttons. With DST set to ON, the time will automatically be adjusted by setting the
time 1 hour forward. With Daylight Saving OFF, the time will be standard time set by the selected
time zone.
ŻŹ
Daylight Saving Kī