SPHINX Myth 7
9
6. CARE AND MAINTENANCE
Clean the exterior with a soft, lint-free, anti-static
cloth. Do not use force while wiping the surface.
To remove difficult stains use a few drops of
detergent on a moist cloth, sweep carefully and
wipe dry afterwards.
If some scratching occurs, please consult your
Sphinx dealer first. He can give you advice about
possible solutions.
Do not use polishing or cleaning agents: they
may damage the sensitive acrylic finish.
Do not use aerosol cleaning agents.
Most contain solvents which might react with and
damage the acrylic finish.
7. TECHNICAL SPECIFICATIONS
Bandwidth 0 - 300,000 Hz (+0/-0.25 dB)
Phase response error <2° (0 - 20,000 Hz)
Gain 29.5 dB max. 29.85 times.
Minimum Power Output (1 - 20,000 Hz) >2x 94.5 W into 8 ohm (19.8 dBW), THD <0.01%
>2x 157.5 W into 4 ohm (22.0 dBW), THD <0.01%
>2x 217.6 W into 2 ohm (23.4 dBW), THD <0.01%
THD+N (IHF-A) <0.06% / 0.006% (2
nd
harmonic, 10 - 20,000 Hz)
IMD
<0.005% (50 W into 8 Ω)
S/N ratio (IHF-A) >85 dB / 98 dB
Channel separation >90 dB (1 - 20,000 Hz)
Slew rate >20 V/µs
Damping factor >500 (1 - 1,000 Hz)
Input cinch: unbalanced
level, nominal 1.25V (1.9 dBV)
impedance
20 kΩ
Supply capacitance 26,000 µF total per channel
Power consumption 550 W max. (15 W standby)
Dimensions (h x w x d) 73 x 434 x 350 mm
Weight 10 kg
This unit conforms to the EMC interference regulations issued by the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and therefore with international safety regulation IEC 65.
Technical specifications may be changed by SPHINX without prior notice if technical developments make this
necessary.
©1999 Audioscript BV
To Previous Page
Loading...
