Spin OK CLIMA - Data Base

14
6.5 DATA BANK (personalized – vehicles)
With the personalized data bank it is possible to memorize 30 vehicles and to give them an appropriate
number; like that it is possible to perform all phases by simply calling the appropriate vehicle number;
For execution press the key “ENTER” after you have chosen “
data base” from the main menu;
the display shows “program choice”; while pressing of one of the two arrow keys the display shows “Setting”;
With “Setting” you program the data banks, with “choose programms” you recall the memorized data.
“INSERT”:
- Press “ENTER”, the first number above on the right (memorized number) illuminates;
- Choose the memory number, which you like to program (from 1-30) via the arrow keys (von 1 bis 30);
- Confirm with “ENTER”;
- The first cipher above left illuminates (duration of vacuum time);
- Program the required vacuum time with the arrow keys and confirm with “ENTER”;
- that illuminates automatically the second cipher;
- Program the duration of the vacuum test and confirm with “ENTER”, by pressing of “0”, the vacuum test
will not be performed;
- Program the amount of fresh oil, which should be inserted within the plant with the arrow keys and confirm
with key „ENTER”;
- program at the end the amount of gas to be inserted within the plant and confirm with “ENTER”;
Repeat the same steps to memorize the other positions of the data bank;
CHOICE OF DATA BANKS MEMORIZED:
For the choice of the memorized positions of the data bank, choose “Choice programs” and confirm with the
key “ENTER”;
- the number above right illuminates;
- Choose with the arrow keys “+ and –“ the number of the data bank according to the car’s sign of the car
which should be charged;
- The display shows (from sx to dx): vacuum time - duration vacuum test- amount of oil – amount of gas;
Confirm with key “ENTER”, like that all phases are being carried out automatically.
Database vehicles
- to proceed press the key “ENTER” after having selected “data bank vehicle” from the menu;
- choose the car manufacturer with the keys “+” and “-“ and confirm with “Enter”;
- choose the present model with the keys “+” and “-“ and confirm with “Enter”;
- the display will show the parameters in memory
- confirm with the key “Enter”;
- now the whole automatic cycle will be performed.