IM-S02-13-IN Issue 136
FT14 Ball Float Steam Trap ½" (DN15) to 1" (DN25)
Pressure bar g
Temperature °F
Steam
saturation
curve
2.3 Pressure/temperature limits (ISO 6552)
The product must not be used in this region.
For optimum performance the PMO should not exceed 14 bar g
Body design conditions PN16
TMA Maximum allowable temperature 200 °C (392 °F)
Minimum allowable temperature -10 °C (14 °F)
PMO Maximum operating pressure for saturated steam service 14 bar g (203 psi g)
TMO Maximum operating temperature 200 °C (392 °F)
Minimum operating temperature 0 °C (32 °F)
PMX
Maximum differential pressure
FT14-4.5 4.5 bar (65.25 psi)
FT14-10 10 bar (145 psi)
FT14-14 14 bar (203 psi)
Designed for a maximum cold hydraulic test pressure of: 21 bar g (305 psi g)
Temperature °C
Pressure psi g
Fig. 3
FT14 (R-L) flanged
Fig. 4
FT14-C (R-L) flanged
To Next Page
Loading...
