Spirax Sarco FT44 - FT46 Stainless Steel Specifications

IM-S02-30 CMGT Issue 14
12
FT43, FT44, FT46 and FT47 Ball Float Steam Traps
2.4 FT46 - Stainless steel
Sizing and pipe connections
DN15, DN20, DN25, DN40 and DN50.
Note: Flow direction when facing the body is as follows:
- DN15 to DN25 is left to right.
- DN40 and DN50 is right to left.
Standard flanges are EN 1092 PN40 with face-to-face dimensions in accordance with EN 26554 (Series 1).
On request - ASME B 16.5 Class 150 and 300 flanges are also available with face-to-face dimensions in
accordance with EN 26554 (Series 1).
Note: ASME flanges are supplied with tapped (UNC) holes for flange bolts.
Fig. 3
FT46
4.5 bar - 21 bar
DN15, DN20 and DN25
DN15 shown
FT46
4.5, 10 and 21 bar
DN40 and DN50
DN50 shown
FT46-C
4.5-21 bar
FT46
DN15 to DN50
32 bar