To Next PageTo Next Page
Need help?Do you have a question about the Spirax Sarco FT44 and is the answer not in the manual?
General| Type | Float Thermostatic Steam Trap |
|---|---|
| Maximum Operating Pressure | 14 bar g (203 psi g) |
| Maximum Operating Temperature | 200°C (392°F) |
| Body Material | Cast Iron, Ductile Iron, Steel |
| Connection Type | Flanged |
| Connection Size | DN15 to DN50 (½" to 2") |
| Application | Used for draining condensate from steam systems |
Covers intended use, access, lighting, and key hazards for safe operation.
Addresses tools, clothing, permits, handling, residual hazards, freezing, and disposal.
Focuses on preventing water hammer, tensile stressing, and managing thermal expansion.
Details general description, air vents, options, standards, and certifications.
Provides FT43 sizes, connections, flow direction, and pressure/temperature limits.
Provides FT44 sizes, connections, flow direction, and pressure/temperature limits.
Provides FT46 sizes, connections, flow direction, and pressure/temperature limits.
Provides FT47 sizes, connections, flow direction, and pressure/temperature limits.
Covers pre-installation checks, material verification, and determining installation situation.
Ensures correct trap orientation, placement, drop leg, and steam locking prevention.
Addresses non-return valve installation, exposed trap protection, and maintenance space.
Ensures system functionality and tests alarms/protective devices after installation or maintenance.
Describes continuous condensate removal, start-up, and trap performance characteristics.
Steps for fitting main valve and air vent assemblies for DN15-DN25 and DN15-DN100 models.
Lists available spare parts and guides on how to order them, specifying trap details.
Details maintenance procedures for DN80-DN100 FT43 and FT44 models.
Describes baffle plate arrangement for DN40 and DN50 horizontal FT mechanisms.
