18
Disconnect device conforming to
IEC 60947-1 and IEC 60947-3
Disconnect device conforming to
IEC 60947-1 and IEC 60947-3
1
2
1
2
L
N
L1
L2
3 A fuse
Product
Product
3 A fuses
5.2 Mains wiring notes:
1. Read Section 5.1 - 'General wiring notes', before attempting to wire the supply to the product.
2. The wiring connections are identified on the terminal plugs.
3. Fuses must be fitted in all live conductors.
4. Double or reinforced insulation must be maintained between:
-
Hazardous live conductors (mains and relay circuits) and
-
Safety extra low voltages (All other components / connectors / conductors).
5. The wiring diagrams show relays and switches in the Power off position.
Fig. 3
Fig. 4
To Next Page
Loading...
