Need help?Do you have a question about the Spirax Sarco SX90 and is the answer not in the manual?
General| Input signal | 4-20 mA |
|---|---|
| Supply voltage | 24 V DC |
| Control form | PID |
| Output signal | 4-20 mA |
| Type | Electronic |
| Control action | Direct or Reverse |
Guidelines for handling and storing the product to ensure its integrity and prevent damage before installation.
Essential steps to protect the instrument from static electricity damage during handling and installation.
Information regarding maintenance and repair, stating the instrument has no user-serviceable parts.
Details the SX series features, sizes, and general operating specifications like temperature and sealing.
Identifies and explains the components and buttons on the controller's front panel.
Explains the quick code system for configuring input and output functionality upon first use.
Instructions for removing the controller from its sleeve and its physical dimensions.
Steps for cutting panels and securing the controller, including required panel cut-out dimensions.
Guidance on suitable environments and critical warnings for electrical installation.
How to operate the controller, select modes, and manage alarms.
Procedures for adjusting set points and accessing deeper operator levels for configuration.
Details on navigating and setting parameters available in Operator Level 2 for fine-tuning.
States the instrument has no user-serviceable parts and advises contacting the supplier for repairs.
To Next Page
