Spirax Sarco SX100 User Manual

IM-S27-06 CH Issue 2
1
SX100
Controller
Quick Set-up Manual
IM-S27-06
CH Issue 2
2230053/2
Printed in the UK © Copyright 2003
1. Introduction
2. Controller

Spirax Sarco SX100 Specifications

General

Brand	Spirax Sarco
Model	SX100
Category	Controller
Language	English

Summary

1. Introduction

2. Controller

Controller Base Mode

PID control operations with no program running; allows program selection.

Controller Program Run Mode

Executes selected program, allows status and program information viewing.

Controller Program Define Mode

Used to view, create, or edit programs and segments.

Controller Define Mode Overview

Used to define the controller's operational characteristics.

Controller Configuration Mode

Configures the controller for different hardware and input/output options.

Setting the Real Time Clock (RTC)

Procedure to set the controller's internal clock and day of the week.

Selecting and Running a Program

Steps to choose and initiate a stored program sequence.

Adjusting the Setpoint

Method to change the target temperature or process value.

Defining and Viewing a Program

Process for creating, modifying, or inspecting program sequences.

Example Program Setup

Practical guide for creating a specific heating program sequence.

Accessing Controller Define Mode

Instructions to enter the mode for configuring controller parameters.

Setting PID Controller Parameters

Guidance on optimizing Proportional, Integral, and Derivative settings.

Entering Configuration Mode

Procedure to access the instrument's configuration settings.

Hardware Definition Parameters

Specifies fitted hardware like input and output types.

Self-tune Procedure

Automatic adjustment of PID parameters, not recommended for all applications.

Pre-tune Procedure

This procedure is not required for this application.

Manual Control Procedure

This procedure is not required for this application.