Need help?Do you have a question about the Spirax Sarco PP 5 Series and is the answer not in the manual?
General| Brand | Spirax Sarco |
|---|---|
| Model | PP 5 Series |
| Category | Valve Positioners |
| Language | English |
Covers access, lighting, hazardous materials, environment, system effects, pressure, temperature.
Covers tools, protective clothing, permits to work, electrical work, commissioning, and disposal safety.
Information on returning products, including hazards and precautions for contamination or damage.
Steps for attaching the sliding pin holder, mounting plate, and sliding pin.
Steps for fixing the positioner to the yoke and setting the actuator to 50% stroke.
Adjusting positioner for horizontal lever and fitting the protection plate.
Details pneumatic connections S (supply), I (signal), and O (output).
Recommendations for air supply quality, piping material, and condensate avoidance.
Explains setting the positioner for direct or reverse action using nozzles U1/U2.
Guides on adjusting sensitivity, damping, and setting the valve's start-of-stroke (zero).
How to adjust the full stroke range of the valve based on control signal.
Procedure for sequential operation of multiple valves using split range.
Steps to change the positioner action from direct to reverse or vice-versa.
Instructions for mounting the input (IM) and output (OM) pressure gauges.
Daily air set cleaning and orifice cleaning procedures.
Identifies common problems like low/high output, hunting, and their remedies.
To Next Page
