Need help?Do you have a question about the Spirax Sarco SP400 and is the answer not in the manual?
General| Input Signal | 4-20 mA |
|---|---|
| Action | Single or Double Acting |
| Supply Pressure | 1.4 to 7 bar (20 to 100 psi) |
| Housing Material | Aluminum |
| Enclosure Rating | NEMA 4X |
| Mounting | Linear or Rotary |
| Ambient Temperature Range | -4° to 176°F (-20° to 80°C) |
Explains the SP400 as a loop-powered positioner for pneumatic actuators, its feedback mechanism, pneumatics, and mounting options.
Provides detailed specifications including input signal range, air supply, output pressure, stroke range, operating temperature, air flow, connections, enclosure, and materials.
Details programmable features such as autostroke, valve type, % travel, control action, split range, deadband, reset, and input signal visualization.
Covers preliminary checks, mounting kit types, enclosure rating, and assembly verification before installation.
Details the steps for mounting the SP400 to linear actuators using pillar and yoke mounting kits.
Outlines the assembly process for fitting the SP400 onto a ¼ turn valve.
Warns about air pressure limits, specifies NPT connections, required air quality, and the necessity of a filter/regulator.
Guides through the initial setup and autostroke routine for 2-port valves.
Guides through the process of fine-tuning the input current signal calibration (4-20 mA) for accurate matching.
Explains the automatic commissioning routine, its duration, successful/unsuccessful indications, error messages, and subsequent steps.
Provides access to basic valve setup functions including valve type, control action, deadband, and split range.
To Next Page
