To Next PageTo Next Page
Need help?Do you have a question about the Spirax Sarco SP200 and is the answer not in the manual?
General| Brand | Spirax Sarco |
|---|---|
| Model | SP200 |
| Category | Valve Positioners |
| Language | English |
General safety and installation considerations for the SP200 positioner's operation.
Electrical safety standards and SELV power source requirements for the SP200.
Compliance with EMC directives and potential interference sources affecting the positioner.
ATEX certification and installation guidelines for potentially explosive environments.
Overview of the SP200 smart valve positioner's functionality, features, and operation.
Detailed specifications including signal range, air supply, temperature, and materials.
Details on the materials comprising the SP200 positioner's construction.
List of adjustable parameters and their specific functions for the SP200.
Information regarding the optional pressure gauge block for monitoring air supply and output.
Preliminary checks and general considerations before mounting the SP200 positioner.
Step-by-step guide for attaching the SP200 to linear actuators.
Step-by-step guide for attaching the SP200 to rotary actuators.
Guidelines for connecting air supply and signal lines to the positioner.
Recommendations for installing cables and wiring in industrial environments.
Diagrams illustrating single and multi-loop wiring configurations for the SP200.
Step-by-step initial setup and autostroke for 2-port valves.
Procedure for initial setup and autostroke for 3-port valves.
Initial setup procedure and overview of SP200 main menu functions.
Guide to navigating and using functions within the SP200 main menu.
Manual control of valve movement and current calibration options.
Procedure for automatic valve commissioning and stroke calibration.
Configuration of valve type, actuator, and travel limits.
Advanced tuning parameters like dead-band and characterisation.
Activating automatic operation and saving programmed settings.
Accessing valve stroke count and total run time data.
Options for returning to the main menu from automatic operation.
Importance of air quality and filter recommendations for SP200 operation.
Step-by-step instructions for replacing the internal filter plug.
Explanation of displays and functions available in the SP200 main menu.
Definitions of various display codes and parameters found in SP200 sub-menus.
