IM-P198-05 MI Issue 24
4. Operating instructions
4.1 Flowmeter display/keypad 47
4.2 Start-up 48
4.3 Using the setup menus 50
4.4 Programming the flowmeter 51
4.5 Output menu 52
4.6 Display menu 53
4.7 Alarms menu 56
4.8 Totalizer #1 menu 58
4.9 Totalizer #2 menu 60
4.10 Energy menu 61
4.11 Fluid menu 62
4.12 Units menu 64
4.13 Time and date menu 65
4.14 Diagnostics menu 66
4.15 Calibration menu 68
4.16 Password menu 69
5. Serial communications
5.1 HART communications 70
5.2 Wiring 70
5.3 HART commands with the DD menu 72
5.4 HART commands with generic DD menu 78
5.5 MODBUS communications 82
5.6 Register definitions 85
5.7 BACNET MS/TP communications 91
5.8 Baud rates on the MS/TP Bus 91
5.9 Supported BACnet objects 92
5.10 ANNEX - BACnet protocol implementation conformance statement 98
5.11 Acronyms and definitions 102
To Next Page
