IM-P077-02 ST Issue 6 7
2. General product information
2.1 Description
The S series is a maintainable cast iron inverted bucket steam trap with screwed in-line
connections and integral strainer. The SF series has integral flanged connections and integral
strainer.
Note: For additional information see the following Technical Information Sheet: TI-P077-01.
2.2 Sizes and pipe connections
½" - SA, ¾" - SB, 1" - SC, 1½" - SD Screwed BSP, ISO 7/1 Rp.
DN15 - SFA, DN20 - SFB, DN25 - SFC, DN40 - SFD.
Standard flange BS 4504 / DIN 2501 PN16 (UNI 2237 / 2229).
Fig. 1
¾" Screwed S series
Fig. 2
DN25 Flanged SF series
To Next Page
Loading...
