Spirax Sarco UTM20 Series - Parameter Descriptions by Menu; Main Menu Structure Overview; Setup > Units Configuration

IM-P505-02-US Issue 1
44
UTM20 Series Ultrasonic Transit-time Flowmeters
10. Parameter Descriptions by Menu
10.1 Main Menu Structure
The transmitter’s firmware has a hierarchical menu structure. See "Menu Map" on page 42 for a visual
path to the parameters.
The five Main Menus used in the transmitter firmware are as follows:
Menu Function
SETUP Contains all of the configuration parameters for initially programming the transmitter to
measure flow
DISPL AY Configures transmitter display functions
INFORMATION Displays system information, such as the model number and firmware version
DIAGNOSTICS Displays system status and allows you to clear the history, reset to factory defaults and
reboot the system
RESET Resets the flow total or unlatches alarms
The following pages define the configuration parameters located in each of the menus.
10.2 Setup > Units
Use SETUP > UNITS to define the measurement standards for the transmitter. Contains all of the
configuration parameters for setting the units and decimals for the readings and the totalizer mode.
Requires operator level passcode or higher if security is enabled.
An asterisk (*) indicates the parameter default.