Spirax Sarco UTM20 Series - Page 45

IM-P505-02-US Issue 1
45
UTM20 Series Ultrasonic Transit-time Flowmeters
Units Submenus Options/Descriptions
FLOW UNITS
Select the flow rate units/interval displayed on the Home Screen FLOW UNITS are
automatically converted into the selected option
Option Units/Interval Option Units/Interval
Fluid BBL/D
Fluid Barrels/Day (31
5 Gal)
GAL/S US Gallons/Second
IBBL/D
Imperial Fluid
Barrels/Day (36 IG)
GAL/MIN US Gallons/Minute
L/S Liters/Second GAL/H US Gallons/Hour
L/MIN Liters/Minute MG/D Million US Gallons/Day
L/H Liters/Hour IG/S
Imperial Gallons/
Second
M3/S Cubic Meters/Second IG/MIN
Imperial Gallons/
Minute
M3/MIN Cubic Meters/Minute IG/H Imperial Gallons/Hour
M3/H Cubic Meters/Hour MIG/D
Million Imperial
Gallons/Day
FT3/S Cubic Feet/Minute OIL BBL/D
Oil Barrels/Day (42
Gal)
FT3/MIN Cubic Feet/Minute
AC-FT/D Acre Feet/Day
FT3/H Cubic Feet/Hour
Custom
This selection in only available if Custom Units is enabled through
SoloCUE Flow Device Manager Use SoloCUE to change the
Custom Units
FLOW DECIMALS
This is a numeric entry for the number of decimal places to display Default is 2 Options
are 0 to 7
FLOW TOTAL
MODE
*GROSS FLOW
FORWARD FLOW
REVERSE FLOW
NET FLOW
Any flow in forward and reverse direction
Forward flow minus reverse flow A
negative total results when reverse flow is
greater than forward flow