SPIT Pulsa 700E - Installing Fuel Cell and Nails; Fuel Cell Installation Procedure; Loading Nail Strips

Tsupport@itwcp.co.uk
www.itwcp.co.uk
Technical Helpline UK: 0800 731 4924
Technical Helpline ROI: 1 800 882 388
Pulsa Operator Guide
Installing the fuel cell and nails
GB
Lift up the cover on the
fuel cell slot.
Insert the fuel cell and
close the cover.
Pull the button (12) back.
Insert the nail strips into
the back of the magazine.
Release the button (12),
Warning
Do not press on the pin
guide (12) while loading
nails. The ejector push
button (12) prevents you
from using the tool when
only three nails are left in
the magazine.
Fuel cell
SPIT nails
Cover
12
11
04