19
Dialling a Directory memory
To dial a Directory memory; Press the
button
You can then scroll through the complete directory by using the and
buttons. Each memory will appear in alphabetical order.
Alternatively, you can search for a particular letter by pressing the , followed
by the alpha key for which you want to search - press 6 once for “M” or twice for
“N” for example. All entries that begin with that letter will then be scanned using
the and buttons.
When you find the memory you require, press the button to dial.
To delete a Directory memory
Access the Directory memory to be deleted, as described above. Press the
button TWICE in quick succession. “ERASE” will appear on the display and the
memory will be deleted.
Direct Access memory
The Direct Access memory buttons have been pre-programmed with the 10 most
frequently used maximiser System Access Codes. These are accessed via the
one-touch memory buttons. A further 10 memory locations have been provided
and can each be programmed with a maximum of 32 digits and 16 alpha
characters. These can be accessed by pressing the memory keys twice.
To Next Page
Loading...
