24
Press the button twice in quick succession holding it down after the
second press until the screen has displayed “HOLD TO CLR CALL”
The screen displays “CALL MEM CLEAR” after all call memories have been
erased.
Redial memory
The redial buffer stores the phone number of the last five numbers that were
called from the telephone, either from the keypad or from a Direct Access memory
Viewing the Redial memories
Press the button. The last number called on the telephone will be displayed
with the telephone number and the message REDIAL 1. Using the and
buttons you can review the last five numbers called. To call any of the
numbers, make sure that the entry required is on the screen and press the
button. The telephone will automatically call the number in Handsfree mode.
To Next Page
Loading...
