SPM GT1 Touch - Page 59

Data di Marzo, 2012
5
Pag. : 59/76
All the product parameters can be modified,
except the TYPE one
PREPARATION (Рис. 13): you can set speed
and temperature.
DISPENSING (Рис. 14): you can set speed
and dispensing duration.
CONSERVATION (Рис. 15): you can set
speed and temperature.
DEFROST (Рис. 16): you can set speed
and temperature.
Рис. 13
Рис. 14
Рис. 15
Рис. 16