SPM U-go - User Manual

Questions and Answers

S
Steve NovakAug 17, 2025
Why is my SPM Kitchen Appliances not cooling properly when the compressor is running?
- A
  Andrew GarrettAug 17, 2025
  There could be several reasons why your SPM Kitchen Appliances unit isn't cooling effectively even when the compressor is running. It might be due to inadequate ventilation around the appliance, so ensure there's at least 20 cm of free space and it's away from heat sources. The appliance might be in wash mode instead of cooling mode; turn off wash mode and activate cooling mode. A malfunctioning fan could also be the issue; check the electrical connections and replace the fan if needed. Finally, there could be a coolant leak; find and fix the leak, then recharge the system.
R
richardmirandaAug 19, 2025
What to do if my SPM Kitchen Appliances won't turn on even when the main switch is ON?
- J
  Jennifer TaylorAug 19, 2025
  If your SPM Kitchen Appliances unit isn't running even with the switch ON, several factors could be at play. The front flange might not be positioned correctly, so ensure it is properly aligned. Check all electrical connections for any disconnections. The switch itself could be broken and need replacement. A defective electronic panel or agitator motor could also be the cause, requiring their replacement.
J
Jennifer JohnsonAug 22, 2025
How to fix an SPM Kitchen Appliances that doesn't cool and the compressor is not running?
- D
  Daniel GilmoreAug 22, 2025
  If your SPM Kitchen Appliances isn't cooling and the compressor isn't running, it could be due to malfunctioning electrical components of the compressor, which would need replacement. Alternatively, some electrical connections may be disconnected, so check them. Finally, the compressor itself may be defective and require replacement.
S
Stephen GilbertAug 25, 2025
Why is nothing coming out of the tap of my SPM Kitchen Appliances even though it's running?
- L
  Lori KruegerAug 26, 2025
  If your SPM Kitchen Appliances is running with a full top tank, but nothing dispenses from the tap, the connecting pipe between the upper tank and the lower freezing cylinder may be clogged; check and unclog it. Also, the mixture in the cylinder may be too dense. In this case, you should establish why the mixture thickens excessively, resolve the problem, and restart the appliance after replacing the mix.
J
Joshua WestAug 27, 2025
How to reduce noise from my SPM Kitchen Appliances?
- E
  Emily ReeseAug 27, 2025
  If your SPM Kitchen Appliances is making excessive noise, it could be due to incorrect installation of the beater and its components; dismantle the beater and reassemble the parts correctly. Another possibility is that the fan blades are hitting internal components; check and adjust them.
A
Alicia RamirezAug 30, 2025
Why is my SPM Ice Cream Maker not cooling properly but the compressor is running?
- L
  Lisa BurtonAug 30, 2025
  Your SPM Ice Cream Maker may not be cooling effectively, despite the compressor running, due to several reasons. First, ensure there's at least 20 cm of free space around the appliance for proper ventilation and that it's away from heat sources. It's possible the appliance is in wash mode; if so, deactivate wash mode and activate cooling mode. A malfunctioning fan could also be the cause; check its electrical connections and replace it if necessary. Finally, a coolant leak could be the issue; locate and repair the leak, then recharge the system.
R
ralph37Sep 2, 2025
What to do if my SPM U-go won't turn on even though the main switch is ON?
- J
  johnsonamySep 2, 2025
  If your SPM Ice Cream Maker doesn't start even when the main switch is ON, there are several potential causes: * Ensure the front flange is correctly positioned. * Check all electrical connections for any disconnections. * The switch itself may be broken and need replacement. * The electronic panel could be defective, requiring replacement. * The agitator motor might be defective, also requiring replacement.
M
Mackenzie ShortSep 5, 2025
What to do if my SPM U-go is not cooling and the compressor is not running?
- J
  John RamirezSep 5, 2025
  If your SPM Ice Cream Maker isn't cooling and the compressor isn't running, it could be due to the following reasons: * The electrical components of the compressor may not be functioning, so replace any non-functioning components. * Some electrical connections might be disconnected, so check all electrical connections. * The compressor itself may be defective, requiring replacement.
M
Madeline RichardsonSep 7, 2025
How to reduce noise from my SPM U-go Ice Cream Maker?
- J
  Jeffrey SilvaSep 8, 2025
  If your SPM Ice Cream Maker is making excessive noise, consider these potential causes: 1. The beater and its components may not be correctly installed. Dismantle and reassemble them properly. 2. The contact between the beater shaft and the bushing of the rear seal may lack lubrication. Dismantle the beater and lubricate these parts. 3. The fan blades might be hitting internal components. Inspect and adjust as needed.
L
Laura ColemanSep 10, 2025
Why is nothing coming out of the tap of my SPM U-go Ice Cream Maker, even though it's running and the tank is full?
- S
  Stephanie VazquezSep 12, 2025
  If your SPM Ice Cream Maker is running with a full tank, but nothing dispenses from the tap, check if the mix flow regulator is closed and open it. Also, the mixture in the cylinder may be too dense. You should determine why the mixture is thickening excessively, resolve that issue, and restart the appliance with fresh mix.