EasyManua.ls Logo

SPM GT2 Touch - User Manual

Default Icon
77 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Дата выпуска: Сентябрь, 2013
5
Pag. : 1/76
GT1 и GT2
Touch
Руководство по эксплуатации
Стр.2
Gebrauchs- und Wartungsanleitung
Seite
26
Operator’s manual
Page
50
Question and Answer IconNeed help?

Do you have a question about the SPM GT2 Touch and is the answer not in the manual?

SPM GT2 Touch Specifications

General IconGeneral
BrandSPM
ModelGT2 Touch
CategoryIce Cream Maker
LanguageEnglish

Summary

Important Warnings and Advices

Technical Specifications

Positioning

Connection to the Power Supply Mains

Start Up Procedures and Operating Instructions

Product Preparation

Explains the process of mixing and preparing the product for freezing.

Dispensing

Describes how to dispense the prepared product from the machine.

Cleaning and Daily Sanitizing Procedures

Sanitizing

Outlines procedures for sanitizing the machine after periods of disuse.

Special Maintenance

Troubleshooting Guide

Machine does not cool, or cools only partially and the compressor is running

Details potential causes and solutions for cooling issues when the compressor is active.

Machine does not cool, or cools only partially and the compressor is not running

Provides troubleshooting steps for cooling problems when the compressor is inactive.

Main power switch is ON but the unit is not running

Addresses issues where the machine fails to start despite the power switch being on.

The auger is not turning

Provides steps to diagnose and fix issues with the auger not rotating.

Touch screen display shows EEPROM ERROR

Describes the "EEPROM ERROR" message and its resolution.

Wiring Diagram

Related product manuals