6. POSITIONING
FOR MAINTENANCE WORKER
ONLY
The
installation
and
subsequent
s
e
r
v
i
c
i
n
g
operations
must be
carried
out by
sk
ill
ed
members
who have been
trained
to use
t
h
e
device and in
compliance
with
t
h
e
regulations
in
f
o
r
c
e
.
a) Remove the packing (Рис.1) and preserve
it in order to reuse for winter storage.
C
a
u
t
i
on
All the parts of the packaging must be
kept
beyond the range of children, as they
might
represent a potential safety/health
risk.
b) Make sure the machine is in perfect
condition.
Рис.
1
Рис.
2
b) Rest the machine on a sturdy, flat surface
making sure it is well ventilated by leaving a
gap of 20 cm around it and do not install it near
heat sources (Рис.2); we
recommend
you
t
o
maintain
a room
temperature between 24
and
32
°
C
.
c) Check that the power mains voltage meets
the specifications on the equipment
identification plate and that the output available
meets the device’s power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR FURTHER PRECAUTIONS, READ
THE
SECTION “CONNECTION TO THE
ELECTRICITY
MAINS”
CAREFULLY.
d) The installation must be carried out in
accordance with the manufacturer’s instructions.
Failure to comply with the positioning and
installation instructions may impair the
machine’s operation.
I
m
po
rt
a
n
t
You are legally required to provide a
suitable
grounding system for the
equipment.
Before carrying out any cleaning and/or special
maintenance on the device, make sure it
is
disconnected from the mains by unplugging
it.
In the event of a breakdown or
malfunctioning,
switch off the device and remove the
plug.
To Next Page
Loading...
Need help?
General
