- Empty the bowl from the remaining product as
much as possible.
- Switch off the unit by pressing the main
switch.
- After unlocking the main cover with its key
(Рис.23), remove the main cover and the
secondary one under it (Рис.24).
- Pour lukewarm water into the bowl (Рис.25)
and, after re-positioning the main cover, make
sure the micro-switch is correctly activated.
N
O
T
E
GT is equipped with a very efficient
safety
mechanism, activated when the cover is
lifted,
designed to protect the operator.
If
the
co
v
e
r
is not
correctly positioned
GT will not
w
o
r
k
.
- Switch on the unit and go through the menu in
order to select the wash mode as described
before.
- Make the unit working in the wash mode for
some minutes and then empty the bowl and
repeat the same operations until the coming out
water is clear (Рис.26).
-Switch off the unit and disconnect cable from
the power supply.
- Provide yourself with a sanitizer suitable for
plastic, rubber and stainless steel objects
(AMUCHINA®).
I
M
P
O
R
T
AN
T
Carefully follow
the mix
p
r
o
du
c
e
r
prescriptions
in terms of time and
m
o
de
s
of
cons
e
r
v
a
t
i
on
.
Рис. 23
Рис. 24
Рис. 25
Рис.
26
To Next Page
Loading...
